How to add a My Player into your Roster (credit goes to Chrome305) - yanks126ws's Blog

yanks126ws's Blog

How to add a My Player into your Roster (credit goes to Chrome305)

Posted on June 30, 2011 at 03:00 PM.

(1)

i used chrome305's nba myplayer thread as a reference(i credit this process to chrome305)... it has pics so it will make it easier for me to explain to you

what i do is i take a CAP and i assign it a certain color shoe. I then make or use a Myplayer and i give it the same exact color. I export it to my laptop and then i use the shoe editor and u load your myplayer (.cmg) file in there and it gives u a value
(video/ thread will walk you through this also)

open up hex, open up your roster and my player files and put the code u got from the shoe editor in for the rosters (make sure u put FF in front of the value ) Step is also in the video

now u can go off the thread/video but i use a short cut

once the shoe value is foudn in the rosters, i make sure that im in HEX (view 27)

From here, you want to go backwards (left and up) up to 80bytes (this is shown in the video and thread)

you then want to switch to DEC!

Heres my shortcut

from your current position, you want to go 36 bytes in DEC

Now you want to highlight the 20 byte (now if ur using a CAP, your going to see a value in that 20 byte thats FF FF) <----- the FF FF is the player bytes! so u can input the value right there!

your not done though, (it took me hours to understand this part)

now you will see after that 20 byte u highlighted that there is a ton of F's (FFFFFFFFFFFF etc.)
YOU WANT TO GO TO THE 1St FF that is seperate from that series (it will be a pattern of FF XX FF XX FF XX etc)

High light the first FF and go 24 Byte in DEC

from that position, highlight the next 48 Bytes in DEC

NOW SWITCH OVER to the myplayer file (tab)

Go to offset 373238

IN HEX view 27, hightlight the next 30 bytes starting from your right in HEX...Copy that value

Go back to your rosters and go to the 48 bytes you highlighted , paste the value there and Bam you got yourself the hidden guy

rehash and reassign

when u load your rosters, the face usually loads up on the player card, once in awhile it doesnt... all u gotta do is edit the guy in the game and just hit accept, the player card will switch over!

make sure after u do this, you change your hidden guys shoe or else next time u do this, your going to edit over him!

what i do is i use the same color every time, i edit my shoes, i got to the far left bottom corner and i use that color all the time.. using the same color all the time will cut time down for doing this. also HXD remebers values so it will remember the shoe value. now if ur familiar with the shoe editor, you know u can do up to 6 guys at a time.... this still aplies to this method, u can technically edit 6 guys as long as you assign the Caps the show value in the roster (you can also write over real players too)

now if i confuse you at all, i can simplify it by saying your following the video and thread till STEP 15 (from Step 15 on, your doing the opposite as in, Treat the Roster as if it was your Myplayer and the Myplayer as your roster and your switching your myplayer values to the roster)

I STRONGLY SUGGEST YOU GUYS USE THE REEDITOR AS THIS PROcESS CAN BE LONG AND FINDING HIDDEN PLAYER'S BYTES CAN BE DIFFICULT. This method is more gear towards nba 2k12 as we wait foe the Release of the REeditor again!

UPDATE:All those still interested in looking for hidden players/Coaches, Check out Hokup Guy's Blog.

-This tool will come in handy for covertering the values from Decimal (base 10) to Hex (base 16)
EXAMPLE: ricky rubio is listed as 1601 on the list, put that as the value for decimal and have it convert to hex....The hex value will be 06 41

I hope this helps you guys out!

http://www.asknumbers.com/BaseNumberConversion.aspx