Workaround for action replay and vista

[Mbalmer]

Does anyone know the problem with using Action Replay and Vista? I have done some research and can't find a good set of instructions, but there does seem to be some sort of problem because I can't get action replay to work with my computer. I have done so much the last week to get to play this on an xbox, so I don't want to give up now!!!

[utorde]

Can't remember what the other problems were and how to fix them when using Vista with one of these programs we use, but I know one of the fixes is by running the program as an administrator. There's a couple of different ways to go about setting a program up like that, and one way works better than the other, but it's one of those things where I actually need it in front of me to know how to do it. I run XP on both of my machines, but I have dealt with several programs on my mother's PC and laptop, both with Vista, and I know exactly what to do when i'm over there and working on hers.

So if you know how to setup programs to run as an administrator on Vista and haven't tried that yet, then give that a go. If that doesn't work someone with Vista will surely help you out.

[Mbalmer]

There doesn't seem to be an easy way around this, so I am just going to use the computer at the funeral home. I got to work this morning and it took me about 5 mins. to figure out. Went home at lunch and gr18's roster and franchise worked. You can lock this thread if you want. Thanks.

ps. vista is no good.

[ringo]

Update to Xbox Action Replay Version 1.40

Next, ensure your docking station is plugged into one of you PC’s USB ports, and your AR card has been inserted fully into the docking station. Also, format your AR card using the Xbox first before following the steps below.
To do this, you will need to put the card into your Xbox controller, and go to the Memory Manager screen. Highlight the Memory Card icon at the top of the screen and choose erase.
Please Note: The following instructions are for Windows XP users. Earlier versions of windows may have slightly differing menus or choices. Some of these changes may be noted in italics following each step that is different.


Step 1:
Right-click on the desktop icon labeled “My Computer.” If this icon is not located on your desktop, or is a shortcut, check for one in your Start menu. A small grey menu should be displayed, choose Properties from this menu.

Step 2:
Select the Hardware tab from the tabs displayed at the top of this window, and then the Device Manager button from the resulting screen.

Some versions of windows may not have a Hardware tab, but the Device Manager button should be visible on the main window in this case.

Step 3:
Examine your Device Manager to find the device name assigned to your AR card. Common names are listed below.

In the category Universal Serial Bus controllers:

USB Mass Storage
USB Device
Unknown USB device

In the category USBIO controlled devices:

Maxdrive Xbox
Action Replay Xbox

In the Other Devices category:

Datel Max Memory
Unknown Device

To verify you have found the correct device, or to assist you with finding the proper name, remove the memory card from the USB docking station. The device name assigned to the AR card will disappear from the list, and reappear when the card is reconnected.


Step 4:
Right-click on the proper device, and choose Properties.

Step 5:
Choose the Driver tab from the resultant window, and then the Update Driver or Reinstall Driver button.


Installing Xbox AR Drivers

You should now have begun the Update Device Driver wizard.

Step 1:
You may be asked to allow windows to connect to Windows Update to obtain the driver, choose “No, not this time” and select Next.

This beginning screen may also ask you to choose between allowing windows to search for the driver and choosing the driver from a list or specific location. Choose the second option (advanced).

Step 2:
Next you will be asked to specify where you would like windows to search. Choose the last option, “Don’t search, I will choose the driver from a list.”

In place of this step or during one of the following steps, you may be prompted to choose the device type. Choose USBIO Controlled Devices, Universal Serial Bus Controllers, or Other Device.
If at any time the window you have reached displays a button labeled Have Disk, make no other choices and proceed to step 3.

Step 3:
On the following screen you should see a button labeled Have Disk. Select this button.

Step 4:
A smaller window will pop up labeled “Install from manufacturer’s disk.” Click the Browse button in this window.

Step 5:
A larger window will pop up with a folder listing. Use the pulldown menu at the top to select C:\Local Disk as your start point (This is your PC hard drive). Your hard drive may also be named something else, such as your computer manufacturer.
If you have difficulty finding it, start at My Computer and select the first option that starts with C:\
If no pulldown menu is available, use the back button (a folder with an up arrow drawn on it) to travel to your hard drive’s main directory.
A selection for the hard drive may also be off to the side of the window, or you may find a My Computer button from which you may proceed as directed above. You will be looking for the Program Files folder, so if this is displayed in the window you are looking in the correct place.

Step 6:
Double-click the Program Files folder. (Folders should be listed in alphabetical order) Next, Double-click the Datel folder, then Action Replay Xbox, then Drivers. If you have multiple folders labeled Action Replay Xbox, check both for the Drivers sub-folder.
If you are still unable to pinpoint the correct folder, you may want to uninstall all versions of Action Replay, delete all of these folders, and reinstall from your disc. If this is done, please be sure to perform the update as directed at the very beginning of this process.

Step 7:
Double-click the file xbreader.inf

Step 8:
The folder browser should automatically close. Select OK from the “Install from manufacturer’s disk” window, and select Next from the Driver Update Wizard window, to which you should have returned.
Windows should begin copying files, and then prompt you to click the Finish button to end the driver installation.
You should now be able to drag to your Xbox AR card normally. You may be prompted to restart your computer before the changes take effect. Ensure you’ve downloaded and are attempting to use an official Power Save; not an unofficial “Community Save”.
If you are still unable to access the card, please try connecting the docking station to a different USB port and repeating the driver installation process.

To transfer file from Finn's EDITOR to AR, 1. right click on AR shortcut on desk top, 2. click properties, 3. click general tab, 4. click box for "read only", 5. make sure on the compatibility tab that the "run this program as administrator box is unchecked.
To transfer file from xbox to AR to desk top, 1. right click the AR shortcut on the desktop, 2. click properties, 3 click the general tab, 4. unclick box for "read only", 5. make sure on the compatability tab that the "run this program as administrator box is checked.
Close AR and re-open

[TheShizNo1]

Thanks a lot for this!!!

[dregor2k3]

Sorry to bring back a several month old post. I'm attempting the work around to by pass vista. Immediately after Step 7: Double-click the file xbreader.inf I get an error that pops up saying the file does not contain a driver and to make sure it is vista 64bit compatible. Any ideas on how to get past this?

[Mbalmer]

I started this back in September and have messed with it several times and I have never got action replay to work with vista. I have been using the computer at work to get rosters, however it crashed ( and we got a new computer with windows 7) and now I am having a guy put in a new hard drive and loading xp on the old computer so I can have a computer at home that will work. I should have it next week!! Not the answer your looking for, but I just couldn't figure it out. sorry.

[Matt23134]

I just turned User Account Control off and my Action Replay works fine with my Vista laptop.