NCAA Basketball 10 Available, Post Impressions Here

[Vechi8]

Quote: Originally Posted by countryboy

my settings right now are: Reach in and charge/block fouls are at 100. Shooting fouls - 70 In air collision fouls - 60 Fatigue setting is 80. I'm liking this because imo, anything higher forces the cpu to run guys in and out even though he's only rotating 8 players. 80 seems to allow guys that can play 35+ minutes to do so for both myself and the cpu, and big men who are forced to run, or low stamina guys, are forced to be subbed in/out.

CB,
I have been testing the fatigue settings as well and as I had stated I was running 90 plus for fatigue but my starters were running about 2 minutes light in terms of playing time. I will take your suggestion in the 80 range. I'm thinking 80-85 as well.

Another thing that I tried was the updated rosters and played them again. Anyone who is light on fast breaks, these new rosters are cranking. You will get breaks, both human and ai. I just think that the temp and speed is too tough to keep up. What I did take from the update is EA could really fine tune this and make up for the deficiencies.

Lastly, bluengold posted a great website for every stat known to man. It does incluse min per game for every player, it is statsheet.com

[Tomba]

Quote: Originally Posted by ndhusker90

Care to share how you did that?

Actually I'm trying not to clutter up the boards with physical slider and roster settings here at OS.

I'm open to discussion and Q&A,but actual settings can be found at the site below when they are released, which should be later on tonight

That said, It's just me combining and play testing the sliders and their interaction with each other. THERE IS a science to it and there is a logic to it too, but it's comllicated and different for each sports video game out there

[Playmakers]

Quote: Originally Posted by countryboy

agreed. As much as I hate sliders, I raised the cpu's steal ability hoping it would cause him to reach more, but he didn't. I'm not sure if hands in the post and perimeter would do anything to help this, as I'm pretty certain they are offensive sliders it seems.

Ther is no attribute rating to make the cpu go for more on ball steals.

So, in order to get more reach in fouls you might want to start by increasing that slider to about 90-100 and work your way down from there if appropriate.

[NoDakHusker]

Quote: Originally Posted by Tomba

Actually I'm trying not to clutter up the boards with physical slider and roster settings here at OS. I'm open to discussion and Q&A,but actual settings can be found at the site below when they are released, which should be later on tonight That said, It's just me combining and play testing the sliders and their interaction with each other. THERE IS a science to it and there is a logic to it too, but it's comllicated and different for each sports video game out there

Ok thanks.

[countryboy]

Quote: Originally Posted by Playmakers

Ther is no attribute rating to make the cpu go for more on ball steals. So, in order to get more reach in fouls you might want to start by increasing that slider to about 90-100 and work your way down from there if appropriate.

I already have the foul slider set at 100. The cpu doesn't reach in very much at all. In fact, they don't attempt many ball steals.

[JAYMO76]

Is there a way to start the game with your defense playing full court man rather than a haldf court D without switiching your D after the first series? I know in 2k you could choose either half or full court to start but I don't see that option in NCAA 10. I only have the demo though so...


P.S. If anyone could post a pic of the UTEP Miners and their court I would greatly appreciate it. I have to wait fr Christmas for this game... my wife won't let me buy it

[countryboy]

Quote: Originally Posted by JAYMO76

Is there a way to start the game with your defense playing full court man rather than a haldf court D without switiching your D after the first series? I know in 2k you could choose either half or full court to start but I don't see that option in NCAA 10. I only have the demo though so...

No and its aggrevating as hell. I wish I could set an option for my team to press after a made basket, or play zone on inbounds passes on my end, etc...I hate having to try to switch defenses and defend at the same time.

Quote:

P.S. If anyone could post a pic of the UTEP Miners and their court I would greatly appreciate it. I have to wait fr Christmas for this game... my wife won't let me buy it

If no one does it prior, I'll post the pic when I get home. At UofL game getting pumped to play some NCAA.

[JAYMO76]

Quote: Originally Posted by countryboy

No and its aggrevating as hell. I wish I could set an option for my team to press after a made basket, or play zone on inbounds passes on my end, etc...I hate having to try to switch defenses and defend at the same time. If no one does it prior, I'll post the pic when I get home. At UofL game getting pumped to play some NCAA.

Thanks for the info. That is dissapointing. I also press after a basket and find it really difficult to set a press after I score a basket.